GM-22888-60 is a puller adapter set used with GM-22888-20A Puller from GM-22888-D Bearing Puller kit to service the Tremec TR6070 manual transmission. GM-22888-60 is used to remove the mainshaft rear bearing support inner race, output shaft press-fit spacer, 5th/6th synchronizer hub, 4th and 6th drive gears, and the 5th, 7th and reverse driven gears. GM-22888-60 must be used on the 5th driven gear due to the lack of clearance between the gear nad the case. When removing the 5th and 7th driven gears, the forcing screw on GM-22888-20A is used against puller pilot GM-46359 to prevent damage to the end of the output shaft.