844-742-8471

Item Detail






L451JT Four-Post Lift with SS Turnplates, Swing Air Jacks - Red
Item Number: HUN454JTPRR
Supplier: HUNTER ENGINEERING COMPANY
 

log in for dealer pricing.




Description

L454JT Harsh-Duty standard-length four post lift with stainless steel turnplates and two (2) 9,000-lb. swing air jacks

Harsh-Duty Rack Features

  • Zinc-rich primer base coat
  • Powder top-coat
  • Stainless steel slip plate top surfaces and turnplates
  • Pre-galvanized and powder coated thresholds
  • Epoxy caulking in joints in key visual areas

Features

  • High-Capacity
    • Lifts 18,000 lbs.
  • Integrated Air Line Kit
    • Convenient power for air tools at front and rear
  • Louvered Locks
    • 16 lock heights ensure runways are level
    • Long-life galvanized cables
  • Control Unit
    • Easy-to-use console
    • Powerful 3-hp motor
  • Umbilical Covering
    • Strong and flexible
    • Protects air and hydraulic lines from damage
  • Two (2) Swing Air Jacks
    • Raise vehicles off runways
    • 9,000-lb. capacity
  • Two (2) Movable Work Steps
    • 12 secure positions
    • Lightweight design
  • Flush Slipplates
    • Wheelbases up to 158"
    • Tethered pins secure plates on basic models
  • Louvered Ramps
    • Prevent wheel spin
    • More effective than diamond tread or abusive strips
  • Pins and Pulleys
    • Large- diameter iron pulleys with teflon bearings ensure long-life
    • Chrome-plated pins
  • Extra-Wide Runways
    • Accommodate vehicles up to 92" wide
  • Open-Front Accessibility
    • Allows easy access to adjustment points and jacks
    • Available on long and standard length runway racks

Includes

  • Stainless steel turnplates
  • Two 9,000-lb. Swing Air Jacks


Product Specification

Maximum Vehicle Weight18,000 lbs. (8164 kg)
Max. wheelbase - General service193 in. (4902 mm)
Maximum Wheelbase - Two-Wheel alignment*177 in. (4496 mm)
Maximum Wheelbase - Four-Wheel Alignment158 in. (4013 mm)
Minimum Four-Wheel Alignment88 in. (2235 mm)
Maximum Lifting Height75 in. (1905 mm)
Alignment HeightAny of 16 lock positions
Minimum height8.75 in (222 mm)
Overall Height98 in. (2489 mm)
Tread width - Min. inside40 in. (1016 mm)
Tread width - Max. outside92 in. (2337 mm)
Motor3 hp, 208-230 VAC, 60 Hz, 1 ph
Air90-150 psi (6.2-10.3 bar)**
*Long wheelbase vehicles may require jacking compensation
**125 psi required for full jack capacity

.