844-742-8471

Item Detail






10K Versymmetric Two-Post Lift - 2 ft. Extended Height
Item Number: CLFCL10V32
Supplier: CHALLENGER LIFTS INC
Price:   844-742-8471

Direct from 3rd Party Supplier



NOTE:  To lift electric vehicles (EVs), optional Electric Vehicle Footpad Kit, CLFTFPK, must be used.

Description

10,000 lb. Verysmmetric® 2-Post Lift with Offset Front Arms and Three-Stage Rear Arms - 2 ft. Extended Height

Challenger's ALI/ETL Certified Versymmetric® Two-Post Lifts maximize your revenue potential by having the flexibility to raise vehicles both symmetrically and asymmetrically in a single service bay. 10,000 lb. Versymmetric® Two-Post automotive lifts can accommodate just about anything that comes in for service and are equipped with one of three Versymmetric® arm configurations.

Features

  • Double your service capabilities! Heavy-duty arms are specially engineered to lift vehicles both true symmetrically and asymmetrically to increase a bay's servicing flexibility and revenue potential.
  • An overhead non-load bearing cable equalization system and small base plate leaves the floor clear so tools can be moved easier and minimizes floor obstructions.
  • Technicians can save valuable time by disengaging both column locks at the same time with our single point mechanical lock release system.
  • User friendly arm restraints automatically disengage when lift is fully lowered for easy positioning of arms and securely engage when lifts is raised.
  • Adjustable arm restraint shafts compensate for uneven floors.
  • Grease fittings located on arm pin bushings minimize corrosion to keep arms swinging freely.
  • 48" elongated carriage design decreases load on bearing.
  • Heavy-duty 5" diameter pulley and 5/16" cable reduces stress on equalization system and increases cable life.
  • Fully gusseted base plate design reduces column deflection.
  • Padded overhead shut off system prevents vehicle damage from being raised too high.
  • Rubber door guards protect vehicles from door damage when accessing driver controls.

Accessories

  • CLF10313   (2) 6" Stack Adapters
  • CLF10315   Stack Adapter Kit
  • CLFTFPK    Electric Vehicle Footpad Kit - designed to give a flat lifting surface

Warranty

Click here for warranty information.



Product Specification

Lifting Capacity10,000 lbs.
Rise Height (measured including tall 6" stack adapters)74.125"
Overall Height11'2" or 11'8" / with 2' Extension: 31'2" or 13'9" / with 3' Extension: 14'2" or 14'8"
Cylinder Overall (Full Stroke)11'11"
Adjustable Width Overall11'6.5" - 11'11"
Drive-Thru Clearance100" / 104.5"
Floor to Overhead Switch10' 8-1/2" or 11' 2-1/2" / with 2' Extension: 12' 8-1/2" or 13' 2-1/2"/ with 3' Extension: 13' 8-1/2" or 14' 2-1/2"
Front Arm Reach - Min / Max20" / 42"
Rear Arm Reach - Min / Max37.625" / 60"
Screw Pad Height - Min / Max3.875" / 6.125"
Inside Columns110" / 114.5"
Low Lock Height12" Net Rise
Motor / Voltage (Single Phase standard) - Standard 2HP, 208-230V
Motor / Voltage (Single Phase standard) - with Quick Cycle option3HP, 208-230V
Speed of Rise38 Seconds
Max Load per Arm2,500 lbs.
Ceiling Height Required11'11" / with 2' Extension: 13'9" / with 3' Extension: 14'9"

.