Description

The Pulser/Solenoid Module (PSM) is a unique combination of products that is designed to simplify installation and significantly improve reliability. The PSM provides one simple product in what is typically sold and installed as three separate items i.e. 24 VDC solenoid valve to start and stop fluid flow, a metering pulser that provides flow measurement information and an inlet filter screen to protect the metering pulser and solenoid valve from foreign material damage. In addition, the PSM provides a simple and convenient electrical connection interface for 24 V power and metering pulse data output via a simple 4 conductor cable. A single 1/2” NPTF inlet and outlet connection to the PSM replaces the typical six connections in competitor installations. This provides not only faster installation, but also greatly reduces possibilities of leaks by reducing the number of fluid connections from six connections to two.

Pulser accuracy is +/- 0.5% with a maximum flow of 7.9 GPM and viscosity range of 9 – 3,000 cSt. Maximum operating pressure is 1,000 PSI, inlet filter/strainer is 150 micron.

An additional unique feature of this Pulser/Solenoid Module (PSM) is the built in bypass capability that allows the PSM to be bypassed in cases of emergency. This bypass is normally in the closed position and security sealed in place, but can be quickly opened by cutting the wire seal and opening the valve to allow manual dispensing operation if necessary. The security seal provides tamper evidence indicating that the bypass has been opened.

Same as P/N 100715 except has the additional unique feature of a built in bypass that allows the PSM to be bypassed in cases of emergency. This bypass is normally in the closed position and security sealed in place, but can be quickly opened by cutting the wire seal and opening the valve to allow manual dispensing operation if necessary. The security seal provides tamper evidence indicating that the bypass has been opened.

Warranty

Two years